The TVS-682 features advanced hardware by adopting 6th Generation Intel® 14nm multi-core processors and was designed around the concept of tiered storage, application-based partitioning and network traffic distribution. Featuring PCIe Gen.3 slots that can support 10GbE/40GbE NIC, PCIe NVMe SSD, graphics cards, and USB 3.1 expansion cards, the TVS-682 also supports smooth 4K @30Hz video transfer, cross-platform file sharing, comprehensive backup and disaster recovery, iSCSI & virtualization and more business applications. Incorporating reliability and security, the TVS-682 presents an ideal choice for a complete business-ready storage solution.
Built-in M.2 SATA 6Gb/s slots & 2.5” SSD slots
Qtier technology and SSD cache enable 24/7 optimized storage efficiency
The Network & Virtual Switch app assists network traffic distribution, and re-routes dedicated bandwidth for diverse applications
Triple HDMI output for smooth 4K video playback
Scalable design with economical QNAP storage expansion enclosures
Virtual JBOD (VJBOD) allows to use QNAP NAS to expand the TVS-682’s storage capacity
Supports QRM+ unified remote server management, QvPC technology, virtual machine and container applications, and storage for virtualization
Specification
| CPU | TVS-682-PT-8G: Intel® Pentium® G4400 3.3 GHz dual-core processor TVS-682-i3-8G: Intel® Core™ i3-6100 3.7 GHz dual-core processor |
|---|---|
| System memory | Total DIMM slots: 4 Maximum memory: 64 GB (16 GB x4) Memory modules pre-installed: 8 GB DDR4 RAM (4 GB x 2) Note: The pre-installed memory modules need to be replaced when expanding the memory to over 24 GB. |
| Flash Memory | 512MB DOM |
| M.2 Slot | 2 x M.2 2242/2260/2280/22110 SATA 6Gb/s SSD Note: 1. The M.2 SSD is not included as standard. 2. M.2 SSD operations can easily generate excessive heat. It is recommended to install a heatsink (from QNAP or a third-party provider) on the M.2 SSD. |
| Hard Drive Tray | 2 x 2.5” SSD 4 x 2.5”/3.5” hard drive or SSD |
| Drive Interface | SATA 6Gbps/3Gbps; Hot-swappable |
| USB | 1 x USB 3.0 port (Front) 4 x USB 3.0 port (Rear) |
| LAN Port | 4 x GbE port (10GbE and 40GbE are supported with the purchase and installation of compatible network adapters) Note: 1. For a list of compatible network adapters, please visit the Compatibility List. 2. For instructions on how to install network adapters, please refer to Chapter 6 of the QNAP NAS Hardware Manual. |
| HDMI Output | 3 |
| Audio Input | Audio In: 2 x 6.3mm MIC In |
| Audio Output | 2 x built-in speaker, 1 x 3.5mm Line-out jack Note: Only one of the above audio output ports can work at a time. If a speaker is connected, the sound will output through the speaker. |
| LED Indicators | System status, 2.5” SSD, M.2 SSD, 3.5” HDD |
| Buttons | System: Power button, Reset button, USB one-touch-backup button |
| System Warning | Buzzer |
| Form Factor | Tower |
| Dimensions | 231.9 (H) x 224.9 (W) x 319.8 (D) mm 9.1 (H) x 8.9 (W) x 12.6 (D) inch |
| Weight | Net (NAS only): 7.7 kg/ 16.96lb Gross (with packing and accessories): 9.5 kg/ 20.94lb |
| Sound Level (dB)* | Sound pressure (LpAm) (bystander position): 20.5 dB (with 4 x Seagate ST2000VN000-1HJ164 hard drive installed) |
| Temperature | 0-40˚C |
| Relative Humidity | 5~95% non-condensing, wet bulb: 27˚C |
| Power Supply | Input: 100-240V~, 3-1.5A, 60-50Hz; Output: 250W |
| PCIe Slot | 2 (1* PCIe Gen3 x16; 1* PCIe Gen3 x4) |
| Fan | System: 1 x 8 cm cooling fan CPU: 1 x 9 cm fan |
